D-Link DCS-933L Security Camera User Manual


  Open as PDF
of 57
 
33D-Link DCS-933L User Manual 33
Section 3 - Conguration
Mail
SMTP Server
Address:
Sender e-mail
Address:
Receiver e-mail
Address:
User Name:
Password:
This is the domain name or IP address of your external e-mail server.
This is the e-mail address listed as the sender for your notication e-mails.
This is the e-mail address that your notication e-mails will be sent to.
If the SMTP server uses authentication, enter your user name.
If the SMTP server uses authentication, enter your password.
This section allows you to congure your camera to send snapshots and video clips to an e-mail address. If you are not sure
what settings to use, check with your e-mail service provider.
Forexample,ifyouwanttouseGmailwithSSL-TLSfore-mailnotications,
you can follow the setup procedure as below:
Step 1-Enter“smtp.gmail.com”inSMTPServerAddress.
Step 2 - Change the SMTP server port number from 25 to 465.
Step 3-Enteryourgmaile-mailaddressinSenderE-mailAddress.
Step 4-Enterthedestinatione-mailaddressinReceiverE-mailAddress.
Step 5-EntertheusernamerequiredtoaccesstheSMTPserver.
Step 6-EnterthepasswordrequiredtoaccesstheSMTPserver.
Step 7 - Select SSL-TLS and then click Save Settings.
Step 8 - Click the Test button to send a test e-mail will be sent to the e-mail
account listed above.
Note: You can also use STARTTLS, which will use SMTP server port number
587.
Note: If you want to use a Yahoo SMTP server, the SMTP server address will be dierent between each registered region, and only SMTP
port 465 is supported for SSL-TLS.
 previous next