Filter
Top Products
47D-Link DNR-312L User Manual
Section 4 - Conguration
IP Filter
By enabling IP filtering you can allow or block visitors from accessing
the NVR. To add IP addresses to the Allowed or Blocked lists, enter the IP
address range you want to allow or block into the text boxes, then click on
Add to Allowed List or Add to Blocked List.
Enabling this will allow only the IP addresses in the allowed list to
access your NVR.
Note: Make sure you enter the IP address of the PC you use to access
the NVR before enabling this option, or you may not be able to
access it afterwards.
Enabling this will block all IP addresses in the blocked list from
accessing your NVR.
Enable
Allowed List:
Enable
Blocked List: