Filter
Top Products
54D-Link DNR-312L User Manual
Section 4 - Conguration
Event Settings
Connection
Lost:
Motion
Detected:
Digital Input:
Hard Disk
Space Full:
Hard Disk
Error:
Fan Error:
Alert is sent when connection is lost.
Alert is sent when motion is detected.
Alert is sent when the signal voltage is above or below a specific
threshold.
When the Overwrite function is not enabled, the NVR will stop
recording when the HDD is full and send an alert.
An alert will be sent if there is an error with the hard disk.
An alert will be sent if there is a fan error.
For Camera Event Settings and System Event Settings:
Step 1: Select an event to listen for:
Buzzer:
E-Map:
E-Mail:
Buzzer will go off as an alert.
Select this option to update the camera status on the E-Map.
Select this option to have e-mail sent to a specified SMTP account
after receiving a camera event.
Step 2: Select an event action:
This page lets you configure what to do when an event is triggered by a
camera, such as when motion is detected. The NVR can then perform an
action, such as sending an e-mail notification.