Filter
Top Products
67D-Link DNR-312L User Manual
Section 5 - Applications
In Windows, you can insert the CD and click NVR Search Utility to run another useful setup tool. When powered on, during
the initial boot sequence, the device will wait to be assigned an IP address via DHCP. If it does not receive a DHCP-assigned
IP address, the Auto-IP process will assign a 169.254.xxx.xxx address to the device. If you want to change the IP address
before logging in, or are unable to connect to the NVR IP address, you can use the NVR Search Utility provided on the
product CD to locate the device on your network and make any needed changes.
Applications
D-Link NVR Search Utility - Windows
Network
Video
Recorder:
Refresh:
Configuration:
LAN:
Receive
DHCP:
Apply:
About:
Exit:
The D-Link NVR Search Utility displays any NVR devices it
detects on the network.
Click to refresh the device list.
Click Configuration to access the Web-based configuration
of the NVR.
Configure the LAN Settings for the NVR.
Select Enable to use DHCP for your LAN IP settings, or
Disable to use static IP.
Click Apply to save and activate the changes to the
LAN Settings.
Click About to view the software version of the NVR Search Utility.
Click Exit to close the utility.