Filter
Top Products
22
2-2 Supplied Accessories
■Remote Control
Preparation of Remote Control
Remove the battery case cover at the back of the remote control and install 2 batteries. (TYPE
AAA)
Operation of the remote control
When a camera image is displayed
When data in an SD card/USB flash drive is displayed
Receiving signal from the remote control
Point the infrared light emitting part of the remote control at the infrared
sensor, and press the button of the desired function.
Receivable range
Distance: Within approx. 7m from the front of the infrared
sensor
Angle: Within 30° up, down, left, and right of the infrared
sensor
WARNING
Children may ingest small batteries;
always keep batteries safe and out
of reach.
If a battery is swallowed, consult
a doctor immediately as this could
result in asphyxiation or be an
obstacle to digestion, etc.
N o t e
The receivable range may be reduced when the main
unit is placed in direct sunlight, near an inverter
fluorescent light or in any other unfavorable conditions.
Depending on the light source conditions, the sensor
may fail to receive any infrared light. In such cases,
relocate the main unit or shield the light source.
P31
P62
Within 7m
sensor