Filter
Top Products
31
English
OPERATION
PROCEDURE
Presentation using the supplied software with the USB-connected PC
Note
• When the SD mode is selected, the specific software supplied withthis prouct can not
be used. Do not switch to the SD mode during operations using the specific software,
as this may cause a malfunction.
• When the operating button is in operation, do not connect/disconnect the USB cable,
or malfunction will be caused to this product.
• The USB cable compliant with USB2.0 is recommended.
• When the DIP switch is set to the VIDEO, the image cannot be output from the USB.
Refer to “OUTPUT (DIP switch)” on page 12 to switch the image output to the RGB.
• Depending on the USB environment used by the PC or peripheral units, the image
transfer could be disturbed.
• This does not guarantee operations in any environment.
“Utility Software” is in the supplied CD-ROM.
“Utility Software” contains the PC link software “Image Mate for Presentation” and the TWAIN
driver “ELMO TWAIN DS (VHO)” for the following operations:
• Transfer of moving/still images to the PC
• Operation of this product from the PC
For details on the operating environment and the Operating System (OS) for the connected
PC and how to use the PC link software etc., refer to the “Utility Software” Installation Manual
and the “HELP Folder” in the CD-ROM.
Note
• Set [USB Mode] to [Application] on the OSD.