Elmo TT-02S Digital Camera User Manual


 
6
English
BEFORE YOU USE
Use the product under the rated electrical conditions. The power cord
applicable to the local power specifications is attached.Be sure to use
the power cord applicable to your local power specifications.
Do not leave this product under direct sunlight or by heaters, or it may
be discolored, deformed or damaged.
Do not keep this product in any humid, dusty, salt bearing wind or
vibrating location. Use it under the following environmental conditions:
Temperature: 0°C - 40°C (32°F-104°F)
Humidity: 30% - 85% (No condensation)
Use a soft, dry cloth for cleaning. Do not use any volatile solvent such
as thinner or benzene.
Do not directly point the camera lens into the sun, or the camera may be
damaged.
Luminescent and Black Spots
There may be some pixels that do not properly operate due to the
use of CCD Area Image Sensors made-up of many pixels. Though
luminescent or black spots may be found on the screen, it is a
phenomenon peculiar to the Sensors and is not a malfunction.
Follow the guidlines below to prevent the unit from dropping or
overturning.
• Use the product on a stable base, desk or table. Do not place the
product on unstable base or slant place.
• Place or wire the unit to prevent the AC adapter cord or video cable
from pulling.
Carry the product holding the lower part of the main unit held in your
both hands. Never hold the product by the column or the camera head.