Filter
Top Products
42
English
VARIOUS
FUNCTIONS AND
OPERATIONS
Save/call setting
The operation status of the unit can be saved/called in the memory. The unit saves 4
conditions (1-3, ON setting) and the storable condition are as follows.
Note
• The saved conditions are retained even if the power is turned OFF.
Selecting [Preset] → [1] ~ [3] in the OSD menu saves the
current unit condition in the selected number.
Selecting [Preset] → [Power On] in the OSD menu saves the
setting to be called when the power switch of the main unit is
ON.
SELECT
Gamma
Preset
Call
Guide
Language
1
2
3
Power On
MENU OK
Note
•
The status of a presentation done with microscope can not be saved.
•
The status of image rotation can be saved only to [1] ~ [3]. (Not to [Power ON])
•
Zoom angle of view in digital zoom mode can not be saved. When the status saving is
done in digital zoom mode, saved zoom angle of view is the maximum TELE position
[Zoom-IN
] of optical zoom.
• Current zoom angle of view
(The range of the optical zoom)
• Brightness
• Mode setting
• Edge enhancement
(in Graphics mode)
• Gamma value setting
(in Graphics mode)
• Status of image rotation
• Status of white balance
• Intensity of red color
(when selecting [White Balance] → [Manual])
• Intensity of blue color
(when selecting [White Balance] → [Manual])
• Posi/Nega setting
• Color/B&W switch setting
How to save setting
SELECT
Gamma
Preset
Call
Guide
Language
1
2
3
Power On
Default
MENU OK
Selecting [Call] → the memory number for the OSD provides
the setting for the selected number.
Selecting [Call] → [Power On] for the OSD provides the setting
for the power supply ON.
Selecting [Call] → [Default] for the OSD provides the factory
setting (excluding the USB mode setting).
How to call setting