Filter
Top Products
7-10
Using Your Camera for Presentations
Make sure the camera is connected to your Macintosh, the
computer is turned on, and the camera dial is turned to
Play. Then follow these steps:
1 Open the EPSON Photo File Uploader as described on
page 7-8.
2 Start your application and open the file to the image you
want to capture.
NOTE
The entire desktop is captured, not just the active window.
Make sure you make your document window as large as
possible before you capture it. If you set your application to
“slide show” mode (or the equivalent), you can capture just
the image you want, without menus and other screen
elements.
3 Press the Command, Shift, and 3 keys on your
computer keyboard at the same time. Your Macintosh
names and saves the screen shot on your hard drive (not
in a folder).
You can make as many screen shots as you’d like; simply
repeat this step.
4 When you are finished, close your application.
To upload your screen shots to the camera, click the EPSON
Photo File Uploader window to make it active, then follow
the uploading instructions starting with step 3 on page 7-5.
Projecting Your Presentation
You can display the uploaded images on a multimedia
projector, television, or other video output device. Use the
video cable that came with your PhotoPC 750Z.
NOTE
Using the optional AC adapter is highly recommended when you
project your presentation. See pages A-1 and A-2 for instructions
and ordering information.
Lily.book Page 10 Tuesday, March 2, 1999 4:06 PM