Filter
Top Products
Sawgrass Technologies, Inc. ~ www.sawgrassink.com
ii
SubliJet IQ
™
Getting Started Guide for the EPSON Stylus
®
Photo 1900
© Copyright 2008, Sawgrass Technologies, Inc., Revision 1.0 September 2008. All rights
reserved. Printed in the United States of America.
SubliJet IQ
®
is a registered trademark of Sawgrass Technologies, Inc. Epson
®
and Stylus
®
are
registered trademarks of Seiko Epson Corporation.
Other trademarks and registered trademarks are the property of their respective owners.
No part of this manual may be reproduced or transmitted in any form by any means without the
prior written consent of Sawgrass Technologies, Inc. Information in this manual is subject
to change without notice and does not represent a commitment on the part of Sawgrass
Technologies, Inc.
IMPORTANT – READ CAREFULLY:
This Process License Agreement (“PLA”) is a legal agreement between you and Sawgrass
Technologies, Inc. (“Sawgrass”). By installing the SubliJet IQ
®
ink in your printer, or otherwise
using the Sawgrass SubliJet IQ
®
ink, you agree to be bound by the terms of this PLA. If you do not
agree to the terms of this PLA, Sawgrass is unwilling to license the process of using the SubliJet
IQ
®
ink to you. In such event, you may not use the SubliJet IQ
®
ink, and you should promptly
contact your supplier for instructions on return of the unopened package.
The process of using the SubliJet IQ
®
ink is protected by U.S. and foreign patents. Sawgrass will
provide a complete list of the relevant patents upon request. The use of the SubliJet IQ
®
ink to
practice the patented process is permitted by this license.
GRANT OF LICENSE: This PLA grants you the following rights: You may install and use the SubliJet IQ
ink packaged herewith in your EPSON printer to practice the printing process described in U.S. Patent No.
5,488,907. The use of any ink, dye, or pigment to practice the Sawgrass Process, other than a SubliJet IQ
Ink
purchased from Sawgrass or its authorized distributor accompanied by a PLA, is not a licensed use of the
Sawgrass Process. No rights to use the Sawgrass Process, except those specified herein, are granted, and no
rights to use any other process, product, software, or hardware developed or sold by Sawgrass are granted
or implied hereby.
LIMITATIONS ON REVERSE ENGINEERING: You agree that you will not attempt to reverse
engineer, reproduce, or deformulate the SubliJet IQ ink.
PATENTS AND COPYRIGHTS: Sawgrass owns multiple U.S. and foreign patents which apply
to the Sawgrass Process and/or the SubliJet IQ ink or its use. All patents in and to the SubliJet ink
and the method of using the SubliJet IQ ink are owned by Sawgrass Technologies, Inc. You may
not copy the printed materials accompanying the SubliJet IQ ink. All rights not specifically granted
under this PLA are reserved by Sawgrass Technologies, Inc.
Made In U.S.A.
CAUTION:
• For best printing results, use the ink within six months of purchase. Please refer to the
individual ink bag/cartridge for the specific ink expiration date
.
• Keep out of reach of children.
• Do not expose ink to temperatures above 100º F or below 40º F.
• Keep ink out of direct sunshine.
Sawgrass Technologies, Inc. agrees to replace any defective ink within a reasonable time, which
shall be Sawgrass’ sole responsibility for errors or defects in these goods.
Sawgrass Technologies, Inc. ~ www.sawgrassink.com