Filter
Top Products
Solving Problems 45
P power on
I paper and H ink flashing
or flashing alternately
An unsupported device is connected to the external
USB port. Connect only a PictBridge compatible digital
camera to the external USB port (see the online
User’s Guide).
P power off
I paper and H ink flashing
alternately
Parts inside the R2000 Series are at the end of their
service life or an unknown error has occurred. Contact
Epson for help (see page 51).
P power off
I paper and H ink flashing
fast
The print head is obstructed by paper or other foreign
material. Turn off the printer, remove any obstructions,
and turn it back on. If the error persists, contact Epson
(see page 51).
P power and I paper
flashing
Paper may have jammed in the sheet feeder, rear
manual feed slot, front manual feed slot, or roll paper
slot.
Sheet feeder or rear manual feed slot: Press the
I paper button to eject any jammed sheets, then
open the printer cover and remove any paper jammed
inside. Reload paper and press the
I paper button
again to clear the error.
Front manual feed slot: Gently pull out the paper and
press the
I paper button to clear the error.
Roll Paper Slot: Cut off any printed roll paper or canvas
media, then remove (see page 12) and reload (see
page 10) the paper.
The CD/DVD tray may be unable to eject. Gently pull
out the CD/DVD tray and press the
I paper button.
See page 29 to reload the tray.
The printer cover may be open. Close the printer cover
to continue. (Leaving the printer cover open stops or
prevents printing.)
Light status Problem and solution