Filter
Top Products
Getting Started 11
1
1
1
1
1
1
1
1
1
1
Attaching the Strap to the Camera
1. Remove the protective pads and metal rings from the strap.
2. Attach the protective pad and the metal ring to one side of the
camera.
3. Lace the end of the strap through the holes in the protective pad
and the metal ring.
4. Lace the strap end through the two plastic fasteners.
5. Repeat these steps to attach the other end of the strap to the other
side of the camera.
Using the Battery
c
Caution:
Only use the Epson lithium-ion battery (EU-85). Do not use any other
make or model of battery under any circumstances.
Charging the Battery
The camera comes with a lithium-ion battery (model EU 85). Be sure to
charge it before using the camera for the first time, or if you have not
used it for a long time. It takes approximately 3.5 hours to fully charge
a new or empty battery.
Metal ring
Protective pad