Filter
Top Products
23 English
INSTALLING THE BATTERY PACK AND CARD
CAUTION
Do not attempt to forcibly remove the card.
iNever remove the card when the multi-indicator is flashing red. In doing so,
you risk losing the data stored in the card.
Close the battery/card compartment cover securely.
iIf the battery/card compartment cover is not closed or is not closed
completely, the camera will no longer be water resistant. When closing the
cover, make sure that no hair or dust is caught between the cover and the
body.
HINT
About the internal backup battery
iThis camera’s internal battery serves to maintain the date and time
settings, as well as the shooting settings. The backup battery will be fully
charged when the battery pack is kept in the camera continuously for about
2 days. In the fully charged state, the backup battery will maintain the
camera settings for about 7 days.
When not using the camera for a long time, remove the battery pack.
iA small amount of power is still used even if the camera is turned off, and it
is therefore recommended that the battery pack be removed from the
camera if it is not going to be used for a long time. Note that when the
battery pack is removed for a long period, the time and date settings may
be cleared. Before using your camera again, be sure to confirm that the
camera settings are correct.
When the dedicated USB interface cable or dedicated AV interface cable
is connected…
iThe construction of the camera is such that when the USB cable or AV
cable is connected, it may be difficult to replace the battery pack. If it
becomes necessary to replace the battery pack in this case, please do so
after disconnecting the USB cable or AV cable from the camera.