Fisher VPC-HD700EX Camcorder User Manual


 
English 62
SETUP
1 Movie stabilizer (page 104)
h Compensate for camera shake
during video clip recording.
2 Focus range (page 106)
h Select the focus range that
corresponds to the distance to
the subject.
3 Focus area (page 108)
4 Light-measuring mode
(page 109)
5 ISO sensitivity (page 110)
*The indicated ISO value is the
standard output sensitivity.
6 White balance (page 112)
7 Remaining battery power
(page 170)
]: Record without image
stabilizer.
\: Record with image
stabilizer on.
-: The camera automatically
focuses on the subject
within a range of 10 cm
(3.94 in.) to infinity (total
range).
*: The camera automatically
focuses on the subject with
a range of 80 cm (31.50 in.)
to infinity (normal).
-: The focus can be set
manually.
+: The camera focuses on the
subject within a range of
1 cm (0.39 in.) to 80 cm
(31.50 in.) (super macro).
B: 9-point range finder focus
C: Spot focus
X: Multi-section light
measuring
W: Center-weighted light
measuring
Y: Spot light-measuring
=: Sensitivity is set
automatically
*: Sets sensitivity to ISO 50
u: Sets sensitivity to ISO 100
v: Sets sensitivity to ISO 200
w: Sets sensitivity to ISO 400
6: Sets sensitivity to ISO 800
-: Sets sensitivity to ISO 1600
z: Sets sensitivity to ISO 3200
>: White balance is
automatically adjusted
depending on the ambient
lighting (auto).
r: For shooting in sunny
conditions (fair)
o: For shooting in overcast
conditions (cloudy)
p: For shooting under
fluorescent lighting
(fluorescent)
q: For shooting under
incandescent lighting
(incandescent)
^: For setting the most
accurate white balance
(one push)