Filter
Top Products
77 English
SHOOTING SINGLE SHOTS
Using the flash
The flash is not only used for photographing under dark conditions, but is also
convenient for example when the subject is in shadow or lit from behind. The
flash is available only when shooting single-shot still images.
1 Display the SIMPLE Mode Shooting Menu (page 48), select the flash
setting, and press the SET button.
h The screen to select the flash operation appears.
2 Select the desired flash operation, and press the SET button.
h This completes the flash operation setting.
3 Press the [ ] button to take the picture.
CAUTION
Do not touch the flash unit when shooting
iThe flash unit becomes very hot and may cause a burn. Avoid touching the
flash unit when shooting.
HINT
iThe flash works only when shooting single-shot still images.
9: The camera detects the subject brightness and uses the flash only
when necessary.
:: The flash operates with every image captured regardless of the
conditions.
;: The flash does not operate even in dark situations.
OK
Auto
Flash automatically