Filter
Top Products
21
Using
the Camera
20
Press this button to stop a procedure midway through.
You can use this button to select the LCD monitor
display.
Photography: Switches the LCD monitor on and off or
displays the framing guides.
Playback: Switches text display off or selects multi-
frame playback.
1Display the menu.
Press the “MENU/OK” button.
4Confirm the setting.
Press the “MENU/OK” button.
2Select a menu option.
Press the left or right arrow on the
4-direction button.
3Select a setting.
Press the up or down arrow on the
4-direction button.
Photography: Changes the page on the display panel.
Playback: Change frame.
Instructions for the next step in the procedure
are displayed at the bottom of the screen. Press
the button indicated.
For example, in the figure shown at right, pressing
the “ ” button shows that DPOF settings are
specified.
In the Owner's Manual the up, down, left and right directions on the 4-direction button are indicated by
black triangles. Up and down are shown as “a” or “b”, while left and right are shown as “d” or “c”.
◆ Displaying the On-screen Help ◆
0 DISP button
0 BACK button
0 g button
0 Using the Menus
You’ve read the chapter on getting ready and the camera is now set up and ready to take pictures.
“Using the Camera” describes the basic camera operations of “Taking Pictures”, then “Viewing Images”
and “Erasing Images”.
This section describes the camera’s functions.
Movie recording
Auto mode
Scene Position
Portrait
Landscape
Sports
Night scene
Movie
You can select the photography mode by turning the Mode dial.
0 Photo mode ( ) button
Photography: Allows you to select the Quality mode,
sensitivity and FinePix COLOR settings.
Playback: Allows you to specify the print order (DPOF)
settings.
Each time one of the “ ” to “ ” buttons is
pressed, the setting for the function associated
with that button (shown on the display panel)
changes.
The function of each button changes depending
on the photography mode and the display panel
display changes accordingly.
0 Function button ~ )
Manual
Manual mode
Aperture-priority Auto
Shutter-priority Auto
Programmed Auto
Photography: Press “ ” to zoom in (telephoto-angle).
Press “ ” to zoom out (wide-angle).
Playback: Press “ ” to enlarge the image.
Press “ ” to revert to normal display.
To use the flash, press the
flash pop-up button to
release the flash.
Still image shooting
0
Photography mode selector
0 abbutton
0 Flash pop-up button
BASIC OPERATION GUIDE
2
Using
the Camera