Filter
Top Products
65
Advanced
Features
64
u
HOW TO SPECIFY PRINT OPTIONS
(
DPOF
)
p
PHOTO MODE PLAYBACK
DPOF stands for Digital Print Order Format and refers to a format that is used for recording
printing specifications for images shot using a digital camera on media such as an xD-
Picture Card. The recorded specifications include information on which frames are to be
printed.
This section gives a detailed description of how to order your prints with the FinePix F610.
On the FinePix F610, you can specify only one print per image in the DPOF settings.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
¬ (➡P.55)
… (➡P.60)
When you erase the image, the DPOF setting for that image is deleted at the same time.
¥ (➡P.65)
If you load an xD-Picture Card that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print
specifications.
¨ (➡P.96)
Up to 999 frames can be specified on the same xD-Picture Card.
1
1Set the Power switch to “w”.
2Press the Photo mode “p” button.
2
To insert the date on your prints, press the “W”
button.
To order prints without dates inserted, press the
“E” button.
“
u
” appears on the screen during playback when
the image has specified with DPOF setting.
1Press the “W” and “E” buttons to set the
number of prints (up to 99).
Set the number of prints to 0 for frames that you
do not want printed.
2Press “d” or “c” to select the frame for which
you want to set DPOF settings.
3When you have completed the settings, always
press the Photo mode “p” button.
●
!
You can order prints of up to 999 image frames on the same xD-
Picture Card.
●
!
DPOF settings cannot be specified for movies.
01 02
If you press the “T” button during the settings, all
the new settings are cancelled. If there were previous
DPOF settings, only the modifications are cancelled.
◆
When DPOF settings were specified on another camera
◆
When the data includes a frame (file) with DPOF
settings that were specified on another camera,
“
¥” is displayed.
Pressing the “
E” button erases all of the DPOF
settings already specified for each frame (file). You
must then specify the DPOF setting for each frame
(file) again.
●
!
Press the “T” button to leave the previous settings
unchanged.
u DPOF SET FRAME
p
PHOTO MODE PLAYBACK
3
Total number of prints
3OK
2Previous frame
2Next frame
Settings for the frame
Back (Cancel)
1Decrease the number
of prints
1Increase the number of prints