Filter
Top Products
72
6
73
02
1Switch the camera off.
2Unplug the special USB cable from the
camera.
Camera
(Special USB)
socket
(Special USB)
socket
DC IN 5V Socket
01
Macintosh
3
DISCONNECTING FROM THE PC
(
Important — always use this procedure.
)
1Quit all applications (FinePixViewer,
VideoImpression, etc.) that are using the
camera.
2Check that the indicator lamp is glowing green
(that the camera is not communicating with
the PC).
Perform the steps shown below before you
switch the camera off. This procedure
differs depending on the operating system
software (or PC) you are using.
No PC operation is needed.
2Left-click the Eject icon in the taskbar and
eject “USB disk”.
●
!
Even after the “Copying...” message is no longer
displayed on your PC, communication with the
camera may still be in progress. Always check that
the indicator lamp on the camera is glowing green
and is no longer flashing.
Windows 98 or 98 SE
Windows Me/2000 Professional/XP
2
For a DSC connection, proceed to step .
For a PC CAMERA connection, proceed to step .
3
2
1
1Right-click the removable
disk icon in the "My
Computer" window and
select Eject.
✽ This step is only required in Windows Me.
✽ Screen for Windows Me
3The menu item shown below appears. Click
the mouse again.
4The “Eject hardware” dialog box appears.
Click the [OK] button or the close button.
✽ Screen for Windows Me
●
!
When you drag the icon to the Trash, “REMOVE OK”
appears on the camera’s LCD monitor.
Drag the “Removable drive” icon on the desktop
to the Trash.