Filter
Top Products
55
Advanced Features
3
54
Í
AF MODE
Available Photography mode: s
Press the shutter button down halfway. The AF
frame appears positioned on the high-contrast
subject near the center of the image.
When the camera has difficulty focusing on the
subject in “MULTI” mode, set the AF mode to
“CENTER” and use AF/AE Lock (➡P.24).
MULTI
Press the shutter button down halfway. The camera
recognizes any strongly contrasting subject near
the center of the LCD monitor and displays the AF
frame over subject in focus.
●
!
When taking pictures in Macro mode, the camera focuses on
the center of the LCD monitor.
CENTER
The camera focuses on the center of the LCD
monitor. Use this setting when taking pictures using
AF/AE lock (➡P.24).
NNN
11110000
I
S
0 80
I
S
0 800 80
1 250 2 5 0 F5F 5 6 61 2 5 0 F 5 61 2 5 0 F 5 61 250 F5 6
1 250 2 5 0 F5F 5 6 61 2 5 0 F 5 61 2 5 0 F 5 61 250 F5 6
1 250 2 5 0 F5F 5 6 61 2 5 0 F 5 61 2 5 0 F 5 61 250 F5 6
1 0 0 0 A M
I
S
0 800 80
NNN
11110000
2 0 0 53 2 4
When there is no high-contrast subject
in the center of the LCD monitor
For a high-contrast subject in
the center of the LCD monitor
11
2
AFA F MODEM O D E
OFFO F FO F FOFF
CENTER
MULTI
CONTINUOUS
Shooting continues as long as holding the shutter
button down. This mode shoots up to 40 frames.
NNN
11110000
h
Long-period continuous shooting
Available Photography modes:
B
,
?
(except for
©
M),
s
◆
Flash
◆
When a Continuous shooting mode is selected, the flash mode is forcibly set to “v” Suppressed flash.
However, when the mode is changed back to normal photography, the flash setting specified before
continuous shooting was selected is restored.
PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
✽ Displaying the menus (➡P.45)
NNN
11110000
I
S
0 80I
S
0 800 80
CONTINUOUS
The camera continues to focus on the main subject
in the AF frame.
Use this mode to take pictures of a moving subject.
◆
Notes on continuous AF
◆
Because the camera focuses continuously without pressing the shutter button, note the
following:
i The battery level (power consumption) increases because data is being overwritten in the camera’s
internal memory.
i If the Auto power off function is set to “OFF”, particular attention must be given to the battery level.