83
Settings
4
82
AA
BB
Formatted xD-Picture Card used for both
A and B.
0001
0005
0006
0010
0001
0005
0001
0005
< CONT. >< RENEW >
é
FRAME NO.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
CONT.: Pictures are stored beginning from the
highest file number stored on the last xD-
Picture Card used.
RENEW: Pictures are stored on each xD-Picture
Card beginning with a file number “0001”.
Setting this function to “CONT.” makes file
management easier as it makes sure that file
names are not duplicated when images are
downloaded to a PC.
●
!
When the camera settings are “ú” RESET, the frame
number setting (“CONT.” or “RENEW”) is changed to
“CONT.” and the frame number itself does not return to
“0001”.
●
!
When the xD-Picture Card already contains image files with
file numbers higher than the highest file number on the last
xD-Picture Card, images are stored beginning from the
highest file number on the current xD-Picture Card.
Check the file number by viewing the image. The
last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers,
while the first 3 digits show the directory number.
●
!
When changing the xD-Picture Card, always turn the
camera off before opening the battery cover. Opening the
battery cover without turning the camera off may cause the
frame number memory to not function.
●
!
File number runs from 0001 to 9999. Once 9999 is exceeded,
the directory number changes from 100 to 101. The
maximum number is 999-9999.
●
!
The displayed frame number may differ for images
photographed on other cameras.
●
!
When [FRAME NO. FULL] appears, see P.110.
0 0 0 91 0 0
NNN
80
2
3
1
1 0 0 0 AM
2 0 0 53 2 4
Directory number
File number
Frame number
ê
LCD BRIGHTNESS
To adjust LCD monitor brightness:
1Press “d” or “c” to adjust the LCD monitor
brightness.
2Press the “MENU/OK” button to confirm the new
setting.
SETS E T CANCELC A N C E L
45
-
+3 2 1
0
1 2 3 4 5
01 02
ã
PLAYBACK VOLUME
To adjust volume while playing back movie and
voice memo.
1Press “d” or “c” to adjust the volume. The
larger the number, the larger the volume is
emitted. “0” indicates a sound deadening.
2Press the “MENU/OK” button to confirm the new
setting.
SETS E T CANCELC A N C E L
10 2 3 4
5
6 7 8 9 101 0
01 02
ë
DIGITAL ZOOM
The position of the “ ” indicator on the
zoom bar shows the zooming status.
The area to the right of the separator
indicates digital zooming, while the area
to the left indicates optical zooming.
Zoom bar display
Optical zoom Digital zoom
Use this function to control the digital zoom.
When zooming changes between optical and
digital, the position of the “■” indicator stops. Press
the same Zoom button again to start the “■”
indicator moving again.
●
!
If the shot goes out of focus during zooming, hold the shutter
button down halfway to refocus the shot.
h Optical zoom focal length
✽
Approx. 36 mm to 108 mm, max. zoom scale: 3×
h Digital zoom focal length
✽
Approx. 108 mm to 666 mm,
max. zoom scale: approx. 6.2×
h Digital zoom focal length („)
✽
Approx. 111 mm to 685 mm,
max. zoom scale: approx. 6.2×
✽ 35 mm camera equivalents
OFFO F FO F FOFF
ON
O NO NON
ONO N
OFFO F FO F FOFF
MIN
M I NM I NMIN
ON
O NO NON
22
O K
DID I G I T A L L ZOOMZ O O M
OFFO F FO F FOFF
1
3
4
2
Using the digital zoom allows you to enlarge your
subject and shoot it. However, it will lower your
image quality. Set the digital zoom when requiring it.
SET-UP
✽ How to use the SET-UP menu (➡P.79)