Filter
Top Products
149
Settings
When the camera establishes communication with a GPS
device, a icon will be displayed in the control panel.
The exposure meters will not turn off while this icon is
displayed. Photo information for pictures taken while the
icon is displayed will include an additional page
recording the current latitude, longitude, altitude, and
Coordinated Universal Time (UTC). If no data is received
from the GPS unit for two seconds, the icon will clear
from the display and the camera will stop recording GPS
information. Also, the auto power save function will not be
performed while the camera is communicating with a GPS
device.
MEMO
• UTC data is provided by the GPS device and is
independent of the camera clock.
• GPS data is only recorded when the icon is
displayed. Confirm that the icon is displayed in the
control panel before shooting. A flashing icon
indicates that the GPS device is searching for a signal;
pictures taken while the icon is flashing will not
include GPS data.
Choose the rate (2 frames/s or 1 frame/s) at which
pictures can be taken in continuous low-speed mode.
MEMO
The frame advance rate may drop at slow shutter speeds
and at [ D-RANGE] setting other than [100% (STD)].
Select [ON] to delay shutter release until about 0.4 s after
the shutter button is pressed, reducing camera shake in
situations in which the least camera movement could
result in blurred photographs (for example, microscope
photography).
See p.101 for details.
Normally, select [ON] to playback images quickly in the
LCD monitor (or [OFF] to playback images slowly). With
any software application, If you encounter some
difficulties with playback or printing of images with [ON]
selected, select [OFF].
SHOOTING SPEED
EXPOSURE DELAY MODE
SELF-TIMER
QUICK PREVIEW DATA
How to use the SET UP menu (➝p.138)