Filter
Top Products
157
Settings
This option controls whether the D button is needed to
set exposure compensation (➝p.76). Exposure
compensation can be set between -5 to +5. If [ON] is
selected, the 0 at the center of the exposure display will
blink even when exposure compensation is set to ±0.
[TEMPORARY]
Same as when [ON], except that the exposure
compensation set using the command dial is only
cancelled when the camera is turned off or the auto
power save function activates.
[ON]
Exposure compensation set by rotating main-
command dial only. The dial used depends on the
option selected for [CHANGE MAIN/SUB] under
[COMMAND DIALS] under [ BUTTON
ASSIGNMENT] in the [SET UP] menu.
[OFF]
Exposure compensation set by pressing D button and
rotating main command dial.
When calculating exposure, center-weighted metering
assigns the greatest weight to a circle in the center of the
frame. The diameter ( ) of this circle can be selected
from 6, 8, 10, and 13 mm (the default option is 8 mm; note
that the diameter is fixed at 8 mm when a non-CPU lens
is used, regardless of the setting selected for the [NON-
CPU LENS DATA] under [ MISC] in the [SET UP]
menu(➝p.121)).
Use this option to fine-tune the exposure value selected
by the camera. Exposure can be fine tuned separately for
each metering method by from +1 to –1 EV in steps of 1/
6 EV.
1 Display the confirmation screen.
EASY EXPOSURE COMP.
CHANGE MAIN/SUB
OFF ON
P Sub-command dial Sub-command dial
S Sub-command dial Main-command dial
A Main-command dial Sub-command dial
M N / A
Exposure mode
CENTER-WEIGHT AREA
FINE TUNE EXPOSURE
APress n or o to select [FINE TUNE
EXPOSURE].
BPress q.
Exposure compensation
Exposure compensation
icon is not displayed when
icon is not displayed when
exposure is altered from the
exposure is altered from the
default value. Continue?
default value. Continue?
FINE TUNE EXPOSURE
FINE TUNE EXPOSURE
SET
SET
CANCEL
CANCEL
How to use the SET UP menu (➝p.138)
Continued Q