Filter
Top Products
158
U SET UP
2 Change the setting.
FLASH/BKT
This option controls flash sync speed. Options range from
1/250 s ([1/250], the default setting) and 1/60 s ([1/60]).
[1/250], [1/200], [1/160], [1/125], [1/100], [1/80], [1/60]
Select one of the above speeds for the flash sync.
[1/250(AUTO FP)]
To enable auto FP high-speed sync when using
Speedlights that support the Nikon Creative Lighting
System (CLS), select [1/250(AUTO FP)] (flash sync
speed will be set to 1/250 s if the built-in flash fires or
the attached Speedlight is not CLS-compatible). When
the camera shows a shutter speed of 1/250 s in
exposure mode or , auto FP high-speed sync will
be activated if the actual shutter speed is faster than 1/
250 s.
ZFixing shutter speed at the flash sync speed limit
To fix shutter speed at the sync speed limit in shutter-
priority auto or manual exposure modes, select the
shutter speed after the slowest possible shutter speed (30
s or ). An X will be displayed in the flash sync
indicator in the control panel and viewfinder.
CPress MENU/OK.
APress n or o to select the metering to
change.
BPress q.
CPress n or o to change the setting.
DPress MENU/OK to confirm the setting.
MATRIX METERING
MATRIX METERING
SPOT METERING
SPOT METERING
CENTER-WEIGHTED
CENTER-WEIGHTED
FINE TUNE EXPOSURE
FINE TUNE EXPOSURE
+ 3 / 6
+ 3 / 6
(
+ 1 / 2
+ 1 / 2
)
+ 2 / 6
+ 2 / 6
(
+ 1 / 3
+ 1 / 3
)
+ 1 / 6
+ 1 / 6
0
+ 5 / 6
+ 5 / 6
+ 4 / 6
+ 4 / 6
(
+ 2 / 3
+ 2 / 3
)
HELP
HELP
FLASH SYNC SPEED
How to use the SET UP menu (➝p.138)