Filter
Top Products
6
Charging the Battery
The battery is not charged at shipment. Charge the battery before use.
1
Connect the AC power adapter.
Connect the supplied AC power adapter to
the camera as shown.
2 Tips: Using an AC power adapter
• The AC power adapter can also be used to power the
camera. Use to prevent unexpected loss of power
during extended playback or when the camera is
connected to a computer or TV.
• If the camera is powered by an AC power adapter,
demo mode slides will be displayed when the cam-
era is turned on. Demo mode can be disabled using
the s DEMO MODE option in the setup menu (pg.
81).
2
Plug the adapter in.
Plug the AC power adapter into a power out-
let. The indicator lamp will glow red while
the battery charges (if the indicator lamp
does not light, check that the battery is cor-
rectly inserted). Charging is complete when
the lamp turns o .
Indicator lamp
The Indicator Lamp
The indicator lamp shows battery charge status as
follows:
Indicator lamp
Indicator lamp
Battery status
Battery status
On (red)
Battery charging
O Battery fully charged
Blinks (red) Battery fault
The indicator lamp also shows focus, ash, exposure,
and recording status (pg. 17).