Filter
Top Products
104
[U SETUP]
SET-UP menu option
Setting Display Factory default Explanation Page
[ IMAGE DISP.]
[3 SEC]/[1.5 SEC]/
[ZOOM
(CONTINUOUS)]
[1.5 SEC]
Sets the way for displaying the check image screen
(photograph result) after taking a picture. The color
tones in images recorded may differ from actual
color. Play back the recorded images to check
them.
106
[ FRAME NO.] [CONT.]/[RENEW] [CONT.]
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
107
[ DUAL IS MODE]
[ CONTINUOUS]/
[ SHOOTING
ONLY]
Specifies whether the Dual Image Stabilization
function is activated always at photography mode or
it is activated only when shutter button is pressed
down halfway.
108
[ ILLUMINATION] [ON]/[OFF] [ON]
Sets whether the illumination lamp lights at startup
and after shooting is complete.
108
[ DIGITAL ZOOM] [ON]/[OFF] [OFF] Specifies whether digital zoom is used together. 108
[ LCD MODE] /
Sets the LCD monitor display to the fine mode or
power save mode.
109
[ DATE/TIME] – – Corrects the date or time. 24
[ VOLUME]
[SHUTTER VOLUME]/
[OPERATION VOL.]/
[PLAYBACK VOLUME]
–
Sets the volume of shutter volume, operation sound
and playback volume. 109
[ SOUND]
[SHUTTER SOUND]/
[START UP SOUND]/
[OPERATION SOUND]
–
Sets the sound of shutter volume, start up sound
and operation sound. 110
[
BLOG IMAGE SIZE
]
[% STANDARD]/
[$ SMALL]
%
Sets the size for blog image when the image is
saved or transmitted.
82
[
LCD BRIGHTNESS
] – 0 Sets the LCD monitor brightness. 110
How to use the [SET-UP] menu (➝p.103)