Filter
Top Products
124
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
FinePixViewer Overview
Enables importing images, managing files and folders,
and ordering prints using the internet (only Windows
users).
ZOperation of image transmission by USB
(Windows only)
Images in this camera are saved in a sub folder according
to the folder category when transmitting to a PC using
FinePixViewer.
When returning images from a PC to the camera, they are
saved in the [MY PICTURES] folder.
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
CAUTION
• Do not format the Memory Card in the camera on the PC.
• Use the Memory Card with images taken by a
FUJIFILM Digital camera.
MEMO
In Windows, if FinePixViewer is already installed, the
driver will be set automatically. No action is required.
CD-ROM
(Software for FinePix)
Refer to Software
Installation (➝p.119, 121)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
AInsert the Memory Card with images into the camera
(➝p.18).
You can use the xD-Picture Card and the SD
Memory Card with the FinePix Z100fd.
In this Owner’s Manual, these cards are expressed as
“Memory Card”.
BConnect the camera to your PC using the USB cable
(included).
CPress w for about 1 second to turn the camera on in
Playback mode.
DSet your PC