Filter
Top Products
80
[ PLAYBACK MENU]
CAUTION
• Make sure the receiving camera is turned on when
transmitting image data.
• If the image is 3:2 ratio, white lines may appear at the
top and bottom or right and left of the print, depending
on the printer type.
• Movie images cannot be transmitted.
• Images photographed with a camera other than FinePix
Z100fd may not be printed or transmitted.
CHECK
• Refer to the manual provided with the receiving device
for more information.
• When exchanging images with another Z100fd, images
are saved automatically in the same folder as the
transmitting camera.
Receiving the image data from a FUJIFILM digital camera is
shown as an example here. You can receive data from
another device in the same way.
CPoint the infrared port on the transmitting camera
directly at the infrared port on the receiving camera
(➝p.12). Transmission distance is about 5 to 20 cm (2
to 7.9 in.) within approx. 15°.
DPress MENU/OK to begin transmission.
When transmission is completed,
[TRANSMISSION COMPLETED] will appear
on the LCD monitor.
(Angle: up to approx.15°)
CONNECTING
CONNECTING
CANCEL
CANCEL
IR COMMUNICATION
IR COMMUNICATION
Receiving the image data
ATurn the camera on.
BSelect the sending frame (file).
IR COMMUNICATION
IR COMMUNICATION
CANCEL
CANCEL
TRANSMIT RECEIVE
TRANSMIT RECEIVE
[ PLAYBACK MENU]