Filter
Top Products
7-1
Activating the Setup Mode
This section describes how to activate the setup mode.
1 Turn the power ON. Then the scanner
displays “Scanner Ready” on LCD.
2 If the scanner dose not have video
interface option, go to the procedure 3.
Press
then the scanner with the
video interface option displays the
Screen M2.
3 Press
then the scanner displays
the Screen M3.
4 Press
then the scanner displays
the Screen M4.
5 Press
. Now the scanner is at the
Screen 41 (page 6-3) in Setup mode.
<Screen M1>
<Screen M2>
<Screen M3>
<Screen M4>
NOTE
Any time you press , you can return to “Scanner Ready” screen.