Filter
Top Products
7-7
4. Reset of abrasion counter
When you reset the abrasion counter, you must set as follows:
1 Press “Next”
or “Previous” and let
the scanner display the Screen 44.
2 At the Screen 44;
If you want to reset the abrasion counter,
select “Yes” by
or button and press
. Go to procedure 3.
If you do not want to reset the abrasion
counter, select “No” and press
.
Finally press
to return.
3 At the Screen 44-1;
If you want to reset the abrasion counter,
select “Yes” and press
. If you do
not want to reset, select “No” and press
.Press to return.
5. Setting pick start time
When you set the pick start time, you must set as follows:
1 Press “Next”
or “Previous” and let
the scanner display the Screen 45.
2 At the Screen 45, press
to increase
the Pick start time or press
to de-
crease the Pick start time. Then press
to activate the setting. Finally press
to return.
<Screen 44>
<Screen 44-1>
<Screen 45>