Filter
Top Products
7-6
NOTE
When you select the Copy Quality, select the scanner’s settings and printer’s carefully to get the best
quality.
3. Setting IPC pre-set mode
When you set the using of IPC pre-set mode, you must set as follows:
1 Press “Next”
or “Previous” and let
the scanner display the Screen 43.
2 At the Screen 43, press
or to select
the pre-Setting and press
to
activate the pre-setting. Then the scan-
ner displays the Screen 43-1.
NOTICE
Following IPC Pre-setting can be selected.
• Sharpen
• Darken Character
• Copy Quarity
3 At the Screen 43-1, select “Yes” or “No”.
Note that when you select “Yes”, the IPC
setting by Host computer is ignored. If you
select “No”, the IPC setting will be
changed according to the host setting.
Finally press
.
<Screen 43>
<Screen 43-1>