Filter
Top Products
6.3 Cleaning the Inside of the Scanner
ScanSnap S500M Operator's Guide 91
Daily Care
6
2. Clean the following locations with a cloth moistened with cleaner F1.
Turn off the scanner before cleaning the following locations.
• Pad ASSY (x 1)
Remove the dirt on the rubber tabs by wiping downward. When cleaning the Pad ASSY,
take care to prevent the cloth from catching on to the metal parts.
• ADF glass surfaces (x 2 located on the ADF and the base unit)
Wipe off the dirt gently.
• Pick roller (x 1)
Wipe to clean the roller while turning it with your finger, be careful not to scratch the sur-
face. Take particular care in cleaning the Pick roller since black debris on the roller
adversely affect the pickup performance.
• Plastic rollers (x 4)
Clean them lightly while rotating the rollers with your finger. Take care not to scratch the
surface of the rollers. Take particular care in cleaning the plastic rollers since black debris
on the rollers adversely affect the pickup performance.
Plastic roller
Pick roller
Feed roller
Glass
Pad ASSY
Eject roller