Filter
Top Products
ADVANCED
SETTING UP THE SHOOTING FUNCTION
ISO
You can select the camera’s sensitivity to light by selecting the ISO sub menu.
Raising the ISO sensitivity will mean that the camera needs less light in order to take an
image. However, the higher the ISO value is, the grainier the image will be.
- AUTO : The camera's sensitivity is automatically changed by variables such as lighting
value or subject brightness.
- 100/200/400 : In the same lighting condition, the higher ISO value is, the faster the
shutter speed will be. However, the images can be saturated with the high
brightness condition.
1. Turn the camera on.
2. Rotate the mode dial to STILL IMAGE mode or MOVIE
CLIP mode.
3. Do not turn the LCD monitor off.
4. Press the MENU button to display the menu on the LCD
monitor. In STILL IMAGE mode, press the LEFT ( ) or
RIGHT ( ) button to select the [STILL IMAGE 2/2]
menu.
5. Press the DOWN button ( ) and select [ISO].
6. Shift to the [ISO] sub menu by pressing the RIGHT
button ( )
7. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is AUTO.
8. After selecting the desired sub menu, press the OK
button to confirm the setting.
9. Press the MENU button to cancel menu display.
< STILL IMAGE mode >
STILL IMAGE 2/2
BACK : SET : OK
AUTO
100
200
400
SHOOTING
EXPOSURE
ISO
W.BALANCE
< MOVIE CLIP mode >
MOVIE CLIP
BACK : SET : OK
AUTO
100
200
400
EXPOSURE
ISO
W.BALANCE
EFFECT