Filter
Top Products
33
1 2
3
White balance
Use this entry to set the white balance saved with the image and
applied to the preview.
To select a preset white balance:
1. Select the MAIN MENU > White Bal entry. The current
setting is displayed here. (See also Navigating the Menu
System for details about how to find this setting.)
2. Use the
or button to step through the available white
balance settings until the setting you want is shown.
3. Either move on to another setting by using the navigator but
-
ton or press the menu button to exit the menu system and
keep your setting.
Please note that white balance settings are for your viewing
convenience only. The setting is temporary for preview display
reasons and in no way affects the file which remains neutral
awaiting further processing.
Media
e storage setting controls where your digital back will store
new images and which stored images will be visible in the browse
window.
Oen, you have just one type of storage media available—the
internal compact-flash card. However, if you have several media
attached (e.g., a card and one or more external disks), then you
may need to switch between them.
If your selected storage medium has more than one batch (folder)
on it, then the batch selected when you use the storage menu entry
will be the one you most recently created.
To select the medium to which to save new shots and from which
to browse previous shots:
1. Press the MENU button.
2. Use
and to select the MEDIA sub-menu.
3. Use the
or button to step through the available media
until the name for destination/source you wish to use is
shown.
4. Either move on to another setting by using the navigator but
-
ton, or:
4. Press the MENU button to exit the menu system and keep
your setting.
Note that you can also select media using just the (+) and (-)
buttons while browsing images. This method also enables
you to select a batch as you zoom in from media to batch to
thumbnails to preview. See Navigating Media and Batches
for complete details about this method.
Sensor unit Setting Usage comments
Sunlight For general outdoor use in direct sunlight.
Cloudy For general outdoor use in cloudy weather.
Shadow For general outdoor use in shady locations out of direct sunlight.
Flash For general indoor use when using a typical flash system.
Fluorescent For use when using fluorescent lighting.
Tungsten For use when shooting indoors under standard tungsten lamps.
There are six ‘White Balance’ settings to choose from.