Filter
Top Products
49
500
For use with 500C/CM, 501C/CM and 503 CX/CXi/CW mod-
els.
• Make a 500 setting.
Shutter Delay
ere can be differences in the amount of time required in prepara-
tion (raising the mirror, opening/closing the shutter etc) for digital
capture between various camera models. is corrective feature
adjusts the time a little to ensure the image is read out from the
sensor. e normal setting is Default and should only be changed
if problems are encountered.
Exposure Time
is setting should be changed for cable-free exposure times longer
than 1/8 second, ensuring that it matches the set shutter speed on the
lens. e settings range from 1/8 second to 32 seconds (1/8 second
is the default setting). e ELD also has a “Bulb” setting.
Capture Sequence
is feature functions in the same manner as an interval timer
and only works in conjunction with a motor or winder driven
camera model except in the case of the Pinhole setting where it is
the only way of controlling such exposures (see later section for
full details).
Initial delay: Controls the amount of time required to elapse before
the first exposure.
Delay: Controls the amount of time required between each ex-
posure.
Count: Controls the total number of exposures required.
Setting CAMERA model and options
Proceed as follows:
1. Press the menu (MENU) button to open the menu.
2. Use
and to select the SETTINGS sub-menu.
3. Press to open the SETTINGS menu.
4. Use
and to select CAMERA.
5. Press to open the CAMERA menu.
6. Press either the or button to select camera model.
7. Use
and to select SHUTTER DELAY or EXPOSURE
TIME if required
.
8. Press either the
or button to make new settings if
required.
9. Press the menu (EXIT) button to exit the menu system and
keep your settings.
1 2
3 4
5 6
7 8
9