Filter
Top Products
54
H4D
The menu is structured in a manner similar to mobile/cell phones and similar small electronic
devices. Various branches within the tree system are accessed by pressing the navigation
button until you reach the point where a choice has to be made.
The
OK
(Approve) button or
SELECTION
(
ZOOM IN /
ZOOM OUT
) buttons are then used to
conrm choice.
Both the front and rear control wheels can also be used to navigate the menu. The rear control
wheel navigates up and down the menu list and the front control wheel navigates sideways in
the direction of the menu arrows. The front control wheel also functions in the same as way
as the plus and minus button functions for settings choice.
Introductory overview of menu access, navigation and settings choice.
After pressing the
MENU
button, the main menu list appears. The blue frame
highlights where you are on the menu. Press on the ‘up’ and ‘down’ symbols on the
navigation button to move up and down the list.
You can return to the standard image view by pressing either on the ‘left’ symbol on
the navigation button or on the
EXIT/MENU
button again.
The need to continue further into the menu is indicated by the arrow symbol beside
the menu item.
Press the ‘right’ arrow symbol on the navigation button to access the next part of
the menu.
When you reach the nal destination of your choice (this might take several moves),
PLUS
and
MINUS
symbols appear to the right in the frame round the item. You then
press the
ZOOM IN /
ZOOM OUT
buttons to access a loop list of choices.
In the example on the left, 100 is the ISO value shown. By pressing either button the
alternatives appear – 200, 400, etc and then back to 100 again. Pressing the
EXIT/
MENU
button will then confirm the new setting.
In the next example on the left, the name of a new batch is changed by pressing a
combination of the
ZOOM IN /
ZOOM OUT
buttons as well as the navigation button.
You can then conrm your choice with the
OK
( ) button or revert to the previous
status by pressing the
EXIT
( ) button. Note that how the
MENU
button is now
described as
EXIT
on the display, and the Approval button is described as the
OK
button. See later sections for more comprehensive information.
The
FLASH
button on
the grip also acts as
a men
u EXIT
button
and the
ISO /WB
button acts as an
OK
button.
The rear control wheel navigates up and
down the menu list and the front control
wheel navigates sideways in the direc-
tion of the menu arrows.
The front control wheel also functions
in the same as way as the
ZOOM IN
and
ZOOM OUT
button functions for settings
choice.
(The wheel can be set in Custom Options
#17).