Filter
Top Products
12
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of your camera. First
is the setup of language menu. Specify in which language menus and messages are to be displayed on the LCD
monitor.
Setting the Language
Press directional buttons to move through the selection.1.
Select a language, and then press 2. OK button
.
Setting the Date & Time
Press left and right direction buttons to move through the selection.1.
Press the up and down buttons to change the value for the date and time.2.
Press 3. OK button
when finished. This will save your date and time settings.
If necessary, press 4. Menu button
to close the menu.
At this point, the camera settings are set to the default automatic mode and is ready to take photos and videos.
Holding down • or keys to change the values continuously.
If the camera is without battery power for more than 48 hours, the initial settings •
may reset and require another setup.
Modes Selector Switch
This camera has a three mode selector switch. The different modes are:
Photo Mode
Slide the mode switch to [ • ] take photos and record audio clips by selecting Voice REC from scene modes
(see pages 12 for additional details).
Video Mode
Slide the mode switch to [ • ] record videos (see page 29 for additional details).
Playback Mode
Slide the mode switch to [ • ] view and edit captured images or playback videos and audio clips.
The recording of voice memo attached to images is also available in this mode.