Filter
Top Products
39
Using Voice Recording
From the Scene menu, select 1. . The Voice Recording
screen layout is displayed on the LCD monitor.
Press the 2. Shutter button
to start recording.
Press the 3. Shutter button
again to stop
recording.
Setting the Drive Mode
This camera features a Self-timer and Burst which can be set in the Burst mode function in the Record Menu. The
Self-timer will take photos after a predefined delay. The burst will take consecutive shots. This function is only
available in Photo mode. The Burst mode setting is automatically set to off when you turn off the camera.
To set the Drive Mode
From the Record menu, select 1. Drive Mode.
Use the 2.
or keys to go through the selection.
Press the 3. OK button
to save and apply changes.
The table below shows the available Drive mode settings.
Icon Item Description
10 Sec Self-timer Sets a 10-second delay to capture image after pressing the Shutter button.
2 Sec Self-timer Sets a 2-second delay to capture image after pressing the Shutter button.
Double Self-timer
Performs delay and capture twice:
Performs a 10-second delay, then captures the image.•
Performs another 2-second delay then captures the image again.•
Burst
Performs continuous shooting when the Shutter button is pressed.
Stops shooting when the shutter button is released.
Speedy Burst
Captures 30 images in a shot when the Shutter button is pressed.
Auto set Image size to VGA only.
Off Captures an image without time delay.