Filter
Top Products
43
Setting the Date Stamp
The date of recording can be printed directly on the still images. This function must be activated before the image is
captured. Once date and time are stamped on a photo, they can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows:
Available for Photos only.•
May slow down AEB/ Burst mode when Date Stamp is enabled in AEB/ Burst mode.•
In vertical or rotated images, the date and time on your photos still appear horizontally.•
To set Date Stamp
From the Record menu, select 1. Date Stamp.
Use the 2.
or keys to go through the selection.
Press the 3. OK button
to save and apply changes.
Setting Auto Review
The Auto Review function lets you view the captured image
right after shooting it.
If Auto review is On, the camera will display the captured
image for 1 second on the LCD monitor.
To set Auto Review
From the Record menu, select 1. Auto Review.
Use the 2.
or keys to go through the selection.
Press the 3. OK button
to save and apply changes.