Filter
Top Products
40
Setting the AEB
AAEB stands for Automatic Exposure Bracketing. It takes 3 consecutive photos in the order of standard exposure,
under exposure and overexposure compensation.
To set AEB
From the Record menu, select 1. AEB.
Use the 2.
or keys to go through the selection.
Press the 3. OK button
to save and apply changes.
Setting the AF Area
AF stands for Automatic Focus. This feature determines the
area on which the camera focuses.
To set AF Area
From the Record menu, select AF Area.1.
Use the 2.
or keys to go through the selection.
Press the 3. OK button
to save and apply changes.
The table below shows the available AF area settings.
Icon Item Description
Multi The camera automatically selects focus area within the wide frame.
Spot The focus area is fixed on the center spot.
Setting the AF Lamp
The AF Lamp function allows you to record images even low
light conditions.
If AF Lamp is set to Auto, the AF lamp located in the front
of the camera, see “Front View” on page 7, emits an red
light by half pressing the Shutter button allowing the
camera to focus easily.
To set AF Lamp
From the Record menu, select AF Lamp.1.
Use the 2.
or keys to go through the selection.
Press the 3. OK button to save and apply changes.