Filter
Top Products
HP photosmart 715 user guide4
Step 2: Install the batteries
1 Locate the battery
compartment door on the
bottom of the camera.
Slide the door out, and
then lift it open.
2 Insert the batteries
according to the markings
inside the battery
compartment.
Step 3: Choose the camera language
1 Remove the lens cap from the camera and slide the
ON/OFF POWER ( ) switch to turn on the camera.
2 Press the right or left side of the 5-
WAY ()
controller until the language you want to use
is highlighted on the image display.
3 Press
OK in the center of the controller to
choose the language.
Step 4: Set the camera date and time
1 Press right or left on the controller to set the day, and then
press the bottom of the controller to select the next field.
2 Set the month, year, hour, minute, and date format using the
same method.
3 To confirm the date and time, press
OK.
OK
HUG.book Page 4 Tuesday, September 25, 2001 1:03 PM