HP (Hewlett-Packard) 715 Digital Camera User Manual


 
HP photosmart 715 user guide52
The incorrect
language is
set on the
camera.
The wrong language
was selected when
you started the
camera the first
time.
Change the camera language by using
the camera’s Setup menu.
1 After opening the Setup menu, use
the down side of the controller
to scroll to the last menu option.
2 Press the right or left side of the
controller until the desired language
appears, and then press
OK.
A long delay
occurs after I
press the
shutter button
and before
the camera
takes a
picture.
The camera is still
saving the last
picture you took.
Wait a few seconds for the camera to
finish processing the image, and then
press the
SHUTTER button halfway down.
When a steady green light appears next
to the viewfinder, the camera is ready to
take another picture.
The light is low and
the flash is turned
off.
In dim light the camera requires a longer
exposure. Keep the camera very steady
by placing it on a tripod until it takes the
picture; or improve the lighting
conditions or use the flash.
A red light
appears next
to the
viewfinder
when I press
the
SHUTTER
button.
The camera is still
saving the last
picture you took.
Wait a few seconds for the camera to
finish processing the image, and then
press the
SHUTTER button halfway down.
When a steady green light appears next
to the viewfinder, the camera is ready to
take another picture.
The CF memory
card has insufficient
space for the
picture. (The status
LCD shows
000
pictures remaining.)
Install a new CF memory card, make
room on the current card by deleting or
unloading photos, or select a lower
image quality setting.
The CF memory
card that you have in
the camera is
damaged or is not
formatted.
Format the CF memory card or replace it
with a new, formatted card.
The flash is
recharging.
Wait until the flash icon on the status
LCD stops blinking before taking another
flash picture.
Problem Possible cause Solution
HUG.book Page 52 Tuesday, September 25, 2001 1:03 PM