HP (Hewlett-Packard) 715 Digital Camera User Manual


 
HP photosmart 715 user guide22
To change the flash setting
With the camera on, press the FLASH ( ) button repeatedly until
the flash setting you want appears on the status LCD. The
button cycles through the four available flash settings.
RED-EYE The flash is used as needed. Red-
eye reduction minimizes the red-
eye appearance in pictures of
people or animals by flashing
twice—once to condition the
subject’s eyes to the flash, and a
second time to take the picture. If
you are photographing people, tell
them to wait for the second flash
before moving.
FLASH ON The flash will be used in all lighting
conditions. The amount of light
provided by the flash will be
adjusted according to the current
lighting conditions. Use this setting
when the lighting for the entire
picture is sufficient, but the lighting
for the subject is not, as in a
backlighting situation. This is
commonly called “fill flash.”
FLASH OFF The flash will not be used,
regardless of the lighting
conditions. Use this setting in
places where flash photography is
not permitted. If necessary, use a
tripod to hold the camera steady.
Symbol Setting Description
HUG.book Page 22 Tuesday, September 25, 2001 1:03 PM