HP (Hewlett-Packard) 715 Digital Camera User Manual


 
Sharing and printing images 35
Using the camera with a Macintosh
computer
You can transfer the images in your digital camera to a Macintosh
computer.
System requirements for a Macintosh
computer
To work with your camera, your Macintosh computer must meet or
exceed the following requirements. For updated system
requirements, go to www.hp.com/photosmart
.
Changing the USB protocol setting
Before you can unload images from the camera to a Macintosh
computer, you must change the USB protocol setting to MSDC in
the Setup menu on the camera’s image display.
To change the USB protocol setting
1 Press the button to turn on the image display.
2 Press the button again to open the main menu, use the
down side of the controller to select the Setup menu, and
then press
OK.
3 Use the up or down side of the controller to scroll to USB.
Operating system
Macintosh OS 8.6 or later
Processor
Power PC, 233 MHz
Memory (RAM)
OS 8.6 or OS 9: 64 MB
OS X: 128 MB
Free hard disk space
150 MB
Video display
800 by 600 pixels, 16-bit color
CD-ROM
Any speed
Interface
USB port
HUG.book Page 35 Tuesday, September 25, 2001 1:03 PM