HP (Hewlett-Packard) 715 Digital Camera User Manual


 
HP photosmart 715 user guide40
To unload images to a Windows or Macintosh computer
1 Change the camera's USB Protocol setting to MSDC so that
the camera will look like a disk drive to the computer. For more
information, see “Changing the USB protocol setting” on
page 35.
2 Connect the camera to the Windows or Macintosh computer
with the USB cable.
3 Turn on the camera. The letters PC appear in the status LCD
to indicate that the camera is connected to the computer. The
computer recognizes the camera as a disk drive.
4 Use the following procedure to access your images as files:
Windows:
Double-click the icon for the newly assigned disk
drive in My Computer or navigate to the drive letter in
Windows Explorer. Use the Copy and Paste commands to
transfer selected images to your hard drive.
Macintosh:
Double-click the Untitled drive icon, and then
drag and drop the selected files to your hard drive.
Using a card reader
You can use a CF memory card reader, such as the SanDisk
ImageMate or a PCMCIA adapter, to view and save image files on
your computer. If you have a CF card reader installed on your
computer, insert the CF memory card into the card reader. Then,
access your images on the CF memory card just as you would
access files on a floppy disk.
Card readers can be purchased from www.hpshopping.com
(selected countries only), or from your local digital camera or
electronics store.
Printing photos on a printer
equipped with a card reader
If your printer has a slot for a CF memory card, as the HP
photosmart 1000 and higher series printers do, you can print your
images directly from the card. For more information, see your
printer’s documentation.
HUG.book Page 40 Tuesday, September 25, 2001 1:03 PM