HP (Hewlett-Packard) 715 Digital Camera User Manual


 
HP photosmart 715 user guide28
Turning the system beep on and off
The camera beeps to let you know that it has finished capturing an
image or to warn you that the batteries are empty or the CF
memory card is full or inoperable. The beep is on by default but
you can turn it off if you are in a location where silence is required
(for example, in a museum or at a school play).
To turn the beep on or off
1 Press the button to turn on the image display.
2 Press the button to open the main menu, use the down side
of the controller to select the Setup menu, and then press
OK.
3 Use the up or down side of the controller to scroll to Beep.
4 Use the right or left side of the controller to select On or
Off, and then press
OK.
Changing the camera language
You can change the language used for the camera menus to one
of five languages: English, French, German, Italian, or Spanish.
To change the camera language
1 Press the button to turn on the image display.
2 Press the button to open the main menu, use the down side
of the controller to select the Setup menu, and then press
OK.
3 Use the down side of the controller to select the Language,
and then press the right or left side of the controller to scroll
to the language you want to use.
4 When the language you want appears in the image display,
press
OK.
5 Press the button to return to the main menu.
HUG.book Page 28 Tuesday, September 25, 2001 1:03 PM