1 Camera/dock connector.
2 USB connector.
3 Power adapter connector.
Before taking pictures
Complete the following procedures before taking pictures or recording video clips.
Install the battery
1. Open the Battery/Memory card door by sliding
the door latch as indicated on the Battery/
Memory card door.
2. Insert the battery in the larger slot, pushing the
battery in until the latch catches.
3. Close the Battery/Memory card door.
Note Turn the camera off before removing
the battery. Fully charge the battery before
using it the first time (see Charge the battery
on page 7).
Charge the battery
You can charge a battery in the camera using an optional AC power adapter or in the
extra battery bay of an optional HP Photosmart camera dock.
1. Connect the AC power adapter to the dock, then plug
it into an electrical outlet.
2. Put the camera in the dock. The camera’s blinking
Battery Charging light indicates that the battery is
charging (if you are charging in an optional
HP Photosmart Premium dock, the dock's Battery
Charging light blinks). The battery is fully charged when
the Battery Charging light turns on solid (approximately
2–3 hours).
Note You can also charge the battery using an
optional HP Photosmart quick recharger.
Turn on the camera
To turn on the camera, press the button.
HP Photosmart R927 Digital Camera 7