Filter
Top Products
71
English
Disc Navigation
1<>2/3
Using Disc Navigation
STARTING OR TERMINATING DISC NAVIGATION
Disc Navigation is a tool for editing scenes recorded on this DVD video camera/recorder.
Here is an explanation on “scene” and “program”, so that you will be able to make most use of Disc
Navigation function.
The screens in this instruction manual are basically those that will appear when the HDD is used:
Some items will not appear when a DVD-RAM/DVD-RW/DVD-R/+RW or card is used, but the
operation is the same.
1 Set the power switch properly.
2 Press the DISC NAVIGATION button.
The Disc Navigation screen (shown on
page 72) will appear.
3 Press the DISC NAVIGATION button again.
Disc Navigation will be terminated and the
DVD video camera/recorder will enter the
recording pause status.
You can also press the C button to end Disc
Navigation.
Before You Begin
• Turn the DVD video camera/recorder on (p. 33).
• When using HDD: Set the power switch to “HDD”.
• When using disc: Set the power switch to “DVD”.
• When using card: Set the power switch to “SD”.
HDD
HDD