English
93
3
SWITCHING QUALITY OF STILL IMAGE (QUALITY)
You can switch the still recording quality only when using card.
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Quality” on the
“Record Functions
Setup” menu screen,
and then press the A
button.
2 Choose the option you want, and then press
the A button.
3 Press the MENU
button to end the
setting.
Note:
The still quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
13
SELF-TIMER
You can record photos using the self-timer function, as with ordinary cameras.
1 Press the MENU
button, use “Operating
Menu” (p. 67) to choose
“Self Timer” on the
“Record Functions
Setup” menu screen,
and then press the A
button.
2 Select “On”, and then press the A button.
The self-timer will be set.
3 Press the MENU button to end the setting.
4 Press the PHOTO button.
The recording indicator at the front of DVD
video camera/recorder will blink.
The self-timer indicator will start to count
down, and recording will commence
approximately 10 seconds later.
Note:
• You can also check that self-timer has been set by
reviewing the on-screen information.
• To release the self-timer mode, choose “Off” on the
menu screen or turn DVD video camera/recorder off.
• To suspend self-timer, press the PHOTO button again
before recording starts, or press the C button.
It is recommended that you use “FINE” when recording vital images. (p. 33 “SIZE AND
QUALITY OF PHOTOS”)
Record Funct ions Setup
N
O
R
M
EC
O
FINE
Qual i t y
Se lf Ti
m
er
O
SD
O
utput
ENTER RETURN
999
REM
NORM
8:00
30/ 9/2005
Still recording quality
The self-timer function is valid only when recording photos (stills).
Se l f Timer
On
Off
RAM
OSD Out put
ENTER RETURN
Record Funct ions Setup
10
999
REM
8:00
30/ 9/2005
Self-timer recording