Filter
Top Products
147
English
Trouble Messages
A message may appear while you are operating the DVD video camera/recorder. If a message appears,
refer to the following table and take appropriate corrective action.
Messages on page 147 and later are arranged in alphabetical order.
Message Cause & Troubleshooting
Reference
page
(1) Data error in a part of
image file. Repair data
now?
(2) Found error in image
file. Repair data now?
(3) Data error in all
image file. Repair all
data now?
It is possible that the system cannot normally complete writing of file
when power is turned off for some reason during recording or
editing (deleting, dividing or combining scenes, or creating play list).
Selecting “YES” will automatically repair the video file, but even if
“NO” is selected, the same message will appear when the DVD
video camera/recorder is turned on next time. (Do not remove the
disc while the DVD video camera/recorder is recognizing it:
Ignoring this will deactivate the file repair function.)
Follow the instructions on screen, taking note of the following
cautions:
• Data may not be repaired, depending on the timing when power
was turned off.
• Data may not be repaired normally if data recorded on another
recorder is mixed in.
• The repaired data may be different from the original recorded
content because of partial deletion of defective portion.
• Since the date/time for repair is added to the repaired data (only
the corrected portion for partial repair), the original date/time
information will be lost.
• Since all movies, and then all stills, are repaired, the order of
recorded contents will be lost.
(In case of message (2) (3) only)
• See *1 on page 153.
(1) Disc is not formatted.
If it formats, it becomes
possible to use for
camera.
(2) However, when you
record from PC
connection terminal,
please do not format.
(3) Format the disc now?
DVD-R disc that was not initialized for camera use was inserted.
43
(1) Error has occurred.
Please restart.
• Error has occurred. Try to restart the DVD video camera/recorder
using the following methods:
(1) Turn power off, remove the battery or AC adapter/charger and
reattach it, and then turn power on again.
(2) Turn power off, and reinsert the disc. Then turn power on
again.
(3) Take note of the number (xxxx), and then consult your dealer.
• See *3 on page 153.
8, 38, 41, 42
(2) Error has occurred.
Please reinsert a disc.
(3) Error has occurred.
Error code No. xxxx.
Please read the manual.
(4) ERROR xxxx
Battery is almost empty.
Replace it.
Replace with a charged battery, or use AC adapter/charger to
power the DVD video camera/recorder.
37, 41
Cannot combine scene. Unless consecutive scenes are selected, they cannot be combined. 105