Filter
Top Products
81
English
USING THE ELECTRONIC IMAGE STABILIZER (EIS)
This DVD video camera/recorder is equipped with an electronic image stabilizer function: When you use
zoom to record a magnified subject image, it will correct fuzziness in the recorded image.
1 Press the MENU button,
choose “EIS” on the
“Camera Functions
Setup” menu screen, and
then press the
button.
2 Choose the “On” or “Off”, and then press the
button.
3 Press the MENU button to end the setting.
●Checking EIS On or Off
You can check EIS On or Off by the on-screen
information display.
After recording with EIS set to “Off”, it is
recommended that you return the setting to “On”
and then turn the DVD video camera/recorder off,
unless you normally record with “Off” setting.
This function is effective only during movie
recording: It will not work during still recording.
Note:
• The EIS setting will be stored in memory even when the
DVD video camera/recorder is turned off.
• Although you can switch EIS between on and off during
still recording, the setting will be effective only during
movie recording.
• It is recommended that you specify “EIS Off” when using
the DVD video camera/recorder on a desk or tripod.
• When “EIS On” is specified, there will be a slight
difference between the actual movement and the
movement on screen.
• Gross camera shake may not be entirely corrected even
if “EIS On” is specified.
• EIS may not operate correctly when a tele or wide-
conversion lens is used.
Ca
m
era Functions Setup
Progra
m
AE
W
hite Bal.
Dig.Z
oom
EIS
Off
On
ENTER RETURN
RAM
MIC.Fi lter
16:9
3 0 MIN
0:00:00
REM
FINE
17:00
30/ 9/2003
EIS